MMA8653FCR1

The MMA8653FCR1 is an intelligent, low-power, three-axis, capacitive Micromachined Accelerometer with 10 bits of resolution. This accelerometer is packed with embedded functions with flexible user-programmable options, configurable to two interrupt pins. Embedded interrupt functions enable overall power savings, by relieving the host processor from continuously polling data. There is access to either low-pass or high-pass filtered data, which minimizes the data analysis required for jolt detection and faster transitions. The device can be configured to generate inertial wake-up interrupt signals from any combination of the configurable embedded functions, enabling the accelerometer to monitor inertial events while remaining in a low-power mode during periods of inactivity.

• 1mg per LSB High Sensitivity
• Low Noise - 150 Micro g per Root Hertz (Independent of Resolution)
• 7 Micro Amps Low-power Mode
• 1.62 to 3.6V Interrupt and IIC Interface Supply
• 1.5 to 800Hz Output Data Rate

Tillämpningar

Sensing & Instrumentation, Consumer Electronics

Varningar

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.