MCP9701-E/TO
Temperature Sensor IC, Analogue, ± 4°C, -40 °C, 125 °C, TO-92, 3 Pins
3 000 Nu kan du reservera lagervaror
| Antal | |
|---|---|
| 1+ | 5,200 kr |
| 25+ | 4,310 kr |
| 100+ | 3,930 kr |
| 1000+ | 3,850 kr |
Produktinformation
Produktöversikt
The MCP9701-E/TO is a Linear Active Thermistor IC which converts temperature to analogue voltage. The device does not require an additional signal-conditioning circuit. The voltage output pin (VOUT) can be directly connected to the ADC input of a microcontroller. The device temperature coefficients are scaled to provide a 1°C/bit resolution for an 8-bit ADC with a reference voltage of 5V. When measuring relative change in temperature from +25°C, an accuracy of ±1°C (typical) can be realized from 0 to +70°C. This accuracy can also be achieved by applying system calibration at +25°C. In addition, this family is immune to the effects of parasitic capacitance and can drive large capacitive loads.
- 19.5mV/°C (typical) Optimized for ADC
- Optimized to drive large capacitive loads
- 6µA (typical) Low operating current
Tillämpningar
Sensing & Instrumentation, Computers & Computer Peripherals, Consumer Electronics, Portable Devices, Power Management, System Monitoring
Tekniska specifikationer
Analogue
± 2°C
0°C
125°C
TO-92
3Pins
5.5V
-
-40°C
-
-
No SVHC (25-Jun-2025)
Voltage
± 4°C
-40°C
70°C
TO-92
3.1V
1Channels
-
125°C
-
AEC-Q100
Teknisk dokumentation (3)
Lagstiftning och miljö
Det land där den sista betydelsefulla tillverkningsprocessen utfördesUrsprungsland:United States
Det land där den sista betydelsefulla tillverkningsprocessen utfördes
RoHS
RoHS
Certifikat för produktefterlevnad