TLE7368EXUMA1

The TLE7368E is a multifunctional Power Supply Circuit especially designed for automotive powertrain systems using a standard 12V battery. The regulator follows the concept of its predecessor TLE6368, where the output of a pre-regulator feeds the inputs of the micro’s linear supplies. In detail, the TLE7368 cascades a buck converter with linear regulators and voltage followers to achieve lowest power dissipation. This configuration allows to power the application even at high ambient temperatures. The step-down converter delivers a pre-regulated voltage of 5.5V with a minimum peak current capability of 2.5A. Supplied by this step down converter two low drop linear post-regulators offer 5 and 3.3V (2.6V) with high accuracy. The current capability of the regulators is 800 and 700mA. The 3.3V (2.6V) linear regulator does have its own input allowing to insert a dropper from the Buck output to reduce the on chip power dissipation if necessary.

• Hardware controlled on/off logic
• Window watchdog circuit
• Overcurrent protection on all regulators
• Power sequencing on controller supplies
• Overtemperature shutdown
• High efficiency for complex supply systems
• High buck current maintains operation under short-circuit condition
• Low current consumption in stand-by
• Easy realization of multiple supply rail systems
• Monitoring and control of µC by reset generator and window-watchdog
• Stand-by regulator with lowest current consumption

Tillämpningar

Automotive, Power Management