MAX17554AATA+

MAX17554 is an ultra-small, high-efficiency, high voltage, synchronous step-down DC-DC converter with integrated MOSFETs that operate over a wide input voltage range and deliver up to 50mA of load current. This operates over a wide input voltage range from 10 to 60V. It offers a converter solution with only three active pins. The devices feature a peak-current mode control architecture. During normal operation, at each rising edge of the clock, the high-side p-MOSFET turns on and remains on until either the appropriate or maximum duty cycle is reached or the peak current limit is detected. During the high-side p-MOSFET on-time, the inductor current ramps up. During the rest of the switching cycle or until the inductor current reaches zero, the high-side p-MOSFET remains off, the low-side nMOSFET remains on, and the inductor current ramps down. Application includes factory automation, aftermarket market automotive, general point of load.

• 3.3V output voltage
• Reduces external components and total cost, no schottky–synchronous operation
• Internal control loop compensation, internal fixed soft-start
• Fixed turn ON/OFF input voltage, all-ceramic capacitors, ultra-compact layout
• Reduced power dissipation
• Higher light-load efficiency with discontinuous conduction mode operation
• 70KHz typical switching frequency (VIN = 24V, TA = -40°C to +125°C)
• Built-in hiccup mode overload protection, overtemperature protection
• Soft-start time range from 0.72 to 0.88ms (VIN = 24V, TA = -40°C to +125°C)
• 8 pin TDFN package, ambient operating temperature range from -40°C to +125°C

Kommentarer

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party