Du har angivit ett värde med ogiltiga tecken i de markerade fälten nedan. Granska ditt val och ange endast giltiga tecken.
Produkten är kanske inte en exakt träff på det du sökte efter
Du köpte nyligen denna produkt.
Visa i beställningshistorik
AES-EVB-BCM4343W-G
Evaluation Board, IoT Starter Kit, BCM4343W MCU, WiFi/Bluetooth, Arduino Compatible
- Tillverkare:
- AVNET AVNET
- Tillverkarens art.nr.:
- AES-EVB-BCM4343W-G
- Orderkod:
- 2915523
Produktinformation
Vill du se liknande produkter? Välj önskade tillval nedan och tryck på knappen ×
- :
- Cypress
- :
- 32bit
- :
- ARM
- :
- Cortex-M4
- :
- BCM4343W, STM32F411
- :
- Avnet IoT Starter Kit Board BCM4343W, MicroUSB Cable, Quick Start Card
Tekniska dokument (1)
CAD Nedladdningar
--Välj...
✔
--Välj...
×
Villkor
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
Produktöversikt
BCM4343W IoT starter kit enables designers to easily prototype cloud-connected IoT designs and then rapidly move from development to production with a pre-certified wireless SoC module. Starter Kit features an Arduino form-factor baseboard and pre-certified Avnet BCM4343W SoC module. This Wi-Fi+BLE+MCU module combines an advanced Cypress's combo 2.4GHz 802.11 b/g/n Wi-Fi and Bluetooth® 4.1 SoC, together with 8Mb of SPI serial flash and an STM32F411 ARM® Cortex M4 microcontroller with 512KB flash and 128KB SRAM. The baseboard includes access to the MCU's various peripherals via Arduino compatible headers as well as a 2x6 format peripheral connector, allowing connection to a range of expansion boards for sensors, motors, digital I/O and analogue inputs. Typical applications include industrial automation, building automation, smart home appliances, IoT enabled sensors and Wi-Fi/BLE gateway.
- USB-based JTAG debugger/programmer and serial UART port
- Reset push button and user push button switch
- Two user LEDs, UART, JTAG and WLAN activity LEDs
- Ambient light sensor
- USB powered (5V), on-board high capacity 3.3V regulated supply
Innehåll
Avnet BCM4343W IoT starter board powered by WICED and Amazon Web Services (AWS), Micro USB cable, Quick start card.
Tillverkas inte längre
436,07 kr
Ingen prisinformation är tillgänglig. Vänligen kontakta kundtjänst
- Pris för:
- Styck
Flera: 1 Minimum: 1
| Antal | Pris | Ditt pris |
|---|---|---|
| 1+ | 436,07 kr | |
Ingen prisinformation är tillgänglig. Vänligen kontakta kundtjänst
Totalt pris:
Totalt pris: ( )
Totalt pris: --
Filterverktyg