Low

J6609 - 

Earth Bonding Point Bar, 3 x 10mm Studs, 1Mohm Resistor, Ring Terminal Cord

VERMASON J6609

Bilden är enbart avsedd som illustration. Se produktbeskrivningen.

Tillverkare:
VERMASON VERMASON
Tillverkarens art.nr.:
J6609
Orderkod:
3547887
Tekniskt datablad:
(EN)
Se alla tekniska dokument

Produktinformation

:
-
:
1Mohm
:
-
:
3
:
-
Hitta liknande produkter Välj och ändra sorteringsfunktionerna ovan för att hitta liknande produkter.

Produktöversikt

The J6609 is a slim Earth Bonding Point Bar has been designed to be installed underneath benchtop where it will be accessible to all connecting ground cords and where it is unlikely to be knocked and damaged or hinder the operator. It is especially suitable for benches with narrow edges. The product is supplied with reverse-mounted screws held in position by self-retaining washers, thereby making the installation process simple. The distance between screw centres is 89mm. The design of the ABS plastic moulding provides strength to the assembly and the rounded corners ensure comfort during use for the operator. Connect earthing cord to a suitable earth. A spare ring terminal is supplied if the cord needs to be shortened. Resistors are usually built-in to each connector. The normal earth contact is linked via individual 1MR resistor rated at 1/2W. In the event of a workstation element becoming live the resistor will limit the fault current to less than 0.3mA at 240V.
  • 1MR Resistor is commonly used in wrist straps and to ground work surfaces

Tillämpningar

Säkerhet

Tillhörande produkter

Jämför vald